Home › Nuts & Wrench Sizes › M6 nut
M6 nut size
10 mm wrench
across-flats spanner / socket size for M6 nut
M6 nut — pairs with M6 bolts.
Full specification
| System | Metric |
| Nominal diameter | 6 mm thread |
| Thread pitch | 1.0 mm |
| Wrench / spanner (across flats) | 10 mm |
| Tap drill | n/a |
| Clearance hole | n/a |
| Common grade / class | matches bolt |
| Typical torque | 10 Nm (7.4 ft·lb) |
| Closest other-system size | ~1/4 in nut |
🔧 Torque unit converter
Pre-filled with the typical torque for M6 nut (matches bolt, dry). Edit any field to convert.
⚠️ Torque values here are general references for matches bolt on clean, dry threads. Lubrication, coatings, and the joint material change the figure significantly. For structural, automotive, or safety-critical work, always use the torque specified by the manufacturer or engineer.
About M6 nut
An M6 hex nut uses a 10 mm wrench across the flats.
Match the nut grade to the bolt — a weak nut undoes a strong bolt.
Frequently asked questions
- What size wrench or spanner fits M6 nut?
- M6 nut uses a 10 mm wrench or spanner, measured across the flats of the hex head.
- What is the torque for M6 nut?
- A typical tightening torque for M6 nut in matches bolt on dry threads is about 10 Nm (7.4 ft·lb). Always confirm against the manufacturer spec for important joints.
- What thread pitch and tap drill does M6 nut use?
- M6 nut has a thread pitch of 1.0 mm and uses a n/a tap drill, with a n/a clearance hole.