Home › Metric Fine Bolts › M10×1.0
M10x1.0 bolt size
17 mm wrench
across-flats spanner / socket size for M10×1.0
M10x1.0 bolt — precision and hydraulic fittings.
Full specification
| System | Metric fine |
| Nominal diameter | 10 mm |
| Thread pitch | 1.0 mm (extra fine) |
| Wrench / spanner (across flats) | 17 mm |
| Tap drill | 9.0 mm |
| Clearance hole | 11 mm |
| Common grade / class | 8.8 |
| Typical torque | 54 Nm (40 ft·lb) |
| Closest other-system size | M10 coarse |
🔧 Torque unit converter
Pre-filled with the typical torque for M10×1.0 (8.8, dry). Edit any field to convert.
⚠️ Torque values here are general references for 8.8 on clean, dry threads. Lubrication, coatings, and the joint material change the figure significantly. For structural, automotive, or safety-critical work, always use the torque specified by the manufacturer or engineer.
About M10×1.0
M10x1.0 extra-fine thread is used in hydraulics and precision adjustment.
Extra-fine threads are easy to cross-thread — start them carefully by hand.
Frequently asked questions
- What size wrench or spanner fits M10×1.0?
- M10x1.0 bolt uses a 17 mm wrench or spanner, measured across the flats of the hex head.
- What is the torque for M10×1.0?
- A typical tightening torque for M10x1.0 bolt in 8.8 on dry threads is about 54 Nm (40 ft·lb). Always confirm against the manufacturer spec for important joints.
- What thread pitch and tap drill does M10×1.0 use?
- M10x1.0 bolt has a thread pitch of 1.0 mm (extra fine) and uses a 9.0 mm tap drill, with a 11 mm clearance hole.