Home › Metric Fine Bolts › M12×1.25
M12x1.25 bolt size
19 mm wrench
across-flats spanner / socket size for M12×1.25
M12x1.25 bolt — automotive, common on Japanese cars.
Full specification
| System | Metric fine |
| Nominal diameter | 12 mm |
| Thread pitch | 1.25 mm (extra fine) |
| Wrench / spanner (across flats) | 19 mm |
| Tap drill | 10.8 mm |
| Clearance hole | 13.5 mm |
| Common grade / class | 8.8 |
| Typical torque | 93 Nm (69 ft·lb) |
| Closest other-system size | M12 coarse |
🔧 Torque unit converter
Pre-filled with the typical torque for M12×1.25 (8.8, dry). Edit any field to convert.
⚠️ Torque values here are general references for 8.8 on clean, dry threads. Lubrication, coatings, and the joint material change the figure significantly. For structural, automotive, or safety-critical work, always use the torque specified by the manufacturer or engineer.
About M12×1.25
M12x1.25 is another common automotive fine pitch, often on Japanese vehicles.
M12x1.25 and M12x1.5 look alike but are not compatible — check before fitting.
Frequently asked questions
- What size wrench or spanner fits M12×1.25?
- M12x1.25 bolt uses a 19 mm wrench or spanner, measured across the flats of the hex head.
- What is the torque for M12×1.25?
- A typical tightening torque for M12x1.25 bolt in 8.8 on dry threads is about 93 Nm (69 ft·lb). Always confirm against the manufacturer spec for important joints.
- What thread pitch and tap drill does M12×1.25 use?
- M12x1.25 bolt has a thread pitch of 1.25 mm (extra fine) and uses a 10.8 mm tap drill, with a 13.5 mm clearance hole.